D00571S01
Clarigard® カートリッジフィルター
pore size 0.5 μm, cartridge nominal length 10 in. (25 cm), filter diam. 2.75 in. (7 cm), Code 7
ログインで組織・契約価格をご覧ください。
サイズを選択してください
表示を変更する
この商品について
UNSPSC Code:
23151806
Quality Segment
material
polypropylene filter, silicone seal
feature
hydrophilic
parameter
4.8 bar max. differential pressure (70 psid) at 25 °C, 4.8 bar max. inlet pressure (70 psi) at 25 °C
cartridge nominal length
10 in. (25 cm)
filter diam.
2.75 in. (7 cm)
impurities
≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
pore size
0.5 μm pore size
cartridge code
Code 7
General description
Cartridge Type: Liquid
Clarigard® filters′ 99.99% retention rating characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard® filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.
Device Configuration: Cartridge
Preparation Note
Sterilization Method:
10 autoclave cycles or SIP at 126°C for 30min
10 autoclave cycles or SIP at 126°C for 30min
Analysis Note
Gravimetric Extractables: ≤ 20mg after 24-h soak in water
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥3L
Other Notes
Directions for Use:
- Organism Retention: 99.99% retention
- Mode of Action: Filtration (nominal)
- Application: BioProcessing
- Intended Use: Bioburden reduction
- Instructions for Use: Please refer to the Polygard® and Clarigard® Cartridges user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
Still not finding the right product?
Explore all of our products under Clarigard® カートリッジフィルター