Water for Titrators
Impact of Water
When working with titrators, water is used for the preparation of the standard solution (titrant), sample preparation/dilution, instrument component rinsing (for example, if the instrument includes an electrode), and glassware rinsing.
Water used in titration experiments should not contain impurities that could interfere with the results of the experiment. Contaminants could react with the solutions and change analysis results. For example, in the determination of chloride concentration by titration, bromide, cyanide and iodide ions interefere directly and are titrated as chloride. Also, high levels of iron will mask the end point, and orthophosphate will cause precipitation.
More Information
You may find more information related to titrators/titration in the following web sites:Feel free to express your comments
Your opinion is important for us. Please let us know if the information provided was useful, if there is missing information that you would like to see or if you have experience that you would like to share with us on this topic. Please contact us by e-mail, send us feed back and we will come back to you. Contact us.Risorse correlate
- Selecting the Optimal Water Quality for Histopathology
- Selecting the Optimal Water Quality for Microbiology
- Selecting the Optimal Water Quality for Dissolution Testing
- Selecting a Water System to Feed Laboratory Washers
- Lab Water regulatory for media preparation
- Milli-Q® IQ 7000
- Milli-Q® IQ 7003/05/10/15
- Milli-Q® IX Pure System
- Milli-Q® HX Pure Central System
- Milli-Q® CLX Clinical CLRW System
- Filmati: Purificazione dell'acqua
- Seminari via web: Lab Water
- Centro Risorse: architetti e ingegneri
- Analisi dei prodotti da parte di SelectScience
