Water for Protein Electrophoresis
Application Overview
Electrophoresis is the migration of a charged particle under the influence of an electric field. Positively charged particles migrate towards the cathode, and the negatively charged ones towards the anode. Their rate of migration depends on the strength of the field, on the net charge, size and shape of the particles (i.e., molecules) and also on the ionic strength, viscosity and temperature of the medium in which the molecules are moving. As an analytical tool, electrophoresis is simple, rapid and highly sensitive. Since many important biological molecules, such as nucleic acids and proteins, have ionizable groups, they exist as electrically charged species at any given pH. As such, electrophoresis is one of the most widely-used techniques in biochemistry and molecular biology.
Proteins are amphoteric compounds. Their net charge is determined by the pH of their environment. At pH above its isoelectric point, a protein has a net negative charge and migrates towards the anode in an electrical field. Below its isoelectric point, the protein is positively charged and migrates towards the cathode. In addition, the net charge carried by a protein is independent of its size. That is, the charge carried per unit mass of molecule is different from one protein to the other. At a given pH therefore, and under non-denaturing conditions (the proteins are in their native state), the electrophoretic separation of proteins is determined by both size and charge of the molecules.
The most widely used method for analyzing protein mixtures qualitatively is SDS-PAGE, which stands for sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis (PAGE). Samples to be run on SDS-PAGE are first boiled in sample buffer containing β-mercaptoethanol or dithiothreitol and SDS. β-mercaptoethanol or dithiothreitol reduce the disulfide bridges that hold the proteins’ tertiary structure, and the SDS binds strongly to, and denatures, the protein. SDS is an anionic detergent which denatures proteins by "wrapping around" the polypeptide backbone. It binds to proteins fairly specifically in a mass ratio of 1.4:1, giving a negative charge to the polypeptide in proportion to its length. In denaturing SDS-PAGE separations therefore, migration is determined not by intrinsic electrical charge of the polypeptide, but by molecular weight.
Protein electrophoresis takes place within a support matrix or "gel", the most commonly used one being polyacrylamide. Normally, the gel is cast in the shape of a thin slab, with wells for loading the sample. The gel is immersed within an electrophoresis buffer that provides ions to carry a current and some type of buffer to maintain the pH at a relatively constant value. The support matrix provides a means of separating molecules by size, in that they are porous gels. A porous gel may act as a sieve by retarding, or in some cases completely obstructing, the movement of large macromolecules while allowing smaller molecules to migrate freely. The pore size in the gel can be varied by changing the concentrations of both acrylamide and bis-acrylamide used to make the gel, with larger pore sizes resulting from lower percent acrylamide. Gels of between 10 and 20% acrylamide are typically used in SDS-PAGE, where the pore size is small enough to introduce a sieving effect that contributes to the separation of proteins according to their size. Gradient gels are also used in SDS-PAGE. These are gels in which the acrylamide concentration varies uniformly from the top to the bottom of the gel, typically 5% at the top to 25% at the bottom . This means that at the top of the gel there is a large pore size (e.g., 5% acrylamide) but as the sample moves down through the gel, the pore size decreases (e.g., 20%). The advantages of gradient gels over fixed-percentage gels are that samples containing a large range of molecular weights can be separated, and proteins with very similar molecular weights can be resolved.
Proteins can also be separated using a technique called isoelectric focusing (IEF) in which separation is achieved by applying a potential difference across a gel that contains a pH gradient. This method has high resolution, being able to separate proteins that differ in their isoelectric points by as little as 0.01 pH unit. Two-dimensional polyacyrlamide gel electrophoresis (2D-PAGE) combines IEF (first dimension) and SDS-PAGE (second dimension) for a highly sophisticated analytical method for analyzing protein mixtures. Between 1000 and 3000 proteins from a cell or tissue extract can be resolved routinely using 2D-PAGE.
Once proteins are separated on a gel, they are most commonly detected on gels using the sulfated trimethylamine dye Coomassie Brilliant Blue. Silver staining is also used when greater sensitivity is required. Proteins separated on a gel may also be transferred to a membrane in a technique called Western blotting. Once transferred on the membrane, the protein(s) of interest are detected using monoclonal or polyclonal antibodies.
More Information
- Learning Center: Electrophoresis
- Learning Center: Western blotting
Feel free to express your comments
Your opinion is important to us. Let us know if this information was useful, or if there was something missing that you'd like to see. Contact us.Risorse correlate
- Selecting the Optimal Water Quality for Histopathology
- Selecting the Optimal Water Quality for Microbiology
- Selecting the Optimal Water Quality for Dissolution Testing
- Selecting a Water System to Feed Laboratory Washers
- Lab Water regulatory for media preparation
- Milli-Q® IQ 7000
- Milli-Q® IQ 7003/05/10/15
- Milli-Q® IX Pure System
- Milli-Q® HX Pure Central System
- Milli-Q® CLX Clinical CLRW System
- Filmati: Purificazione dell'acqua
- Seminari via web: Lab Water
- Centro Risorse: architetti e ingegneri
- Analisi dei prodotti da parte di SelectScience
