コンテンツへスキップ
Merck

427152

ポリ(ビニリデンフルオリド)

average Mw ~180,000 by GPC, average Mn ~71,000, beads or pellets

別名:

PVDF

ログインで組織・契約価格をご覧ください。

サイズを選択してください


この商品について

化学式:
(CH2CF2)n
CAS番号:
NACRES:
NA.23
PubChem Substance ID:
UNSPSC Code:
12162002
MDL number:
テクニカルサービス
お困りのことがあれば、経験豊富なテクニカルサービスチームがお客様をサポートします。
お手伝いします
テクニカルサービス
お困りのことがあれば、経験豊富なテクニカルサービスチームがお客様をサポートします。
お手伝いします

InChI

1S/C2H2F2/c1-2(3)4/h1H2

SMILES string

FC(F)=C

InChI key

BQCIDUSAKPWEOX-UHFFFAOYSA-N

vapor pressure

15 mmHg ( 32 °C)

form

beads or pellets

melt index

20-35 g/10 min (230°C/3.8kg)

mol wt

average Mn ~71,000, average Mw ~180,000 by GPC

impact strength

2-4 ft-lb/in. (Izod, ASTM D 256, notched)

dielectric constant

8.0-9.5, 100 Hz (ASTM D 150)

hardness

76-80 (Shore D, ASTM D 2240)

refractive index

n20/D 1.42

ASTM D 3835

6,000-7,500 poise(230 °C) (100 sec-1)(lit.)

transition temp

brittleness temperature -62 °C (ASTM D 746), Tm 155-165 °C

solubility

some polar solvents such as organic esters and amines: soluble

density

1.78 g/mL at 25 °C

Quality Level

類似した製品をお探しですか? 訪問 製品比較ガイド

関連するカテゴリー

Application

コ-ティング、フィルム、フィルタ-クロス、器具ライニング、ろ過膜、ポンプの部品、ライニング、バルブ。

Features and Benefits

結晶化条件に応じて、3種類以上の形態で結晶化します。機械強度、耐磨耗性、絶縁耐力が優れています。ほとんどの化学薬品、UV照射、風化作用、菌類に耐性があります。

保管分類

11 - Combustible Solids

wgk

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)


適用法令

試験研究用途を考慮した関連法令を主に挙げております。化学物質以外については、一部の情報のみ提供しています。 製品を安全かつ合法的に使用することは、使用者の義務です。最新情報により修正される場合があります。WEBの反映には時間を要することがあるため、適宜SDSをご参照ください。

427152-100G: + 427152-BULK: + 427152-250G: + 427152-VAR:

jan


最新バージョンのいずれかを選択してください:

試験成績書(COA)

Lot/Batch Number

適切なバージョンが見つかりませんか。

特定のバージョンが必要な場合は、ロット番号またはバッチ番号で特定の証明書を検索できます。

以前この製品を購入いただいたことがある場合

文書ライブラリで、最近購入した製品の文書を検索できます。

文書ライブラリにアクセスする

Noriko Kotobuki et al.
Journal of biomedical materials research. Part A, 101(2), 537-546 (2012-08-29)
For tissue engineering and regenerative medicine, stem cells should be effectively cultured in vitro. New thermoresponsive nanocomposite gels (MD-NC gels), consisting of inorganic clay (hectorite) and copolymers composed of hydrophobic 2-methoxyethyl acrylate (MEA) and hydrophilic N,N-dimethylacrylamide (DMAA) units, could be
Yu-Jen Hsu et al.
The Journal of the Acoustical Society of America, 132(6), 3826-3831 (2012-12-13)
A tone analyzer is demonstrated using a distributed resonator architecture on a tensioned piezoelectric polyvinyledene diuoride (PVDF) sheet. This sheet is used as both the resonator and detection element. Two architectures are demonstrated; one uses distributed, directly addressed elements as
S V Ivanov et al.
Klinichna khirurhiia, (7)(7), 37-41 (2012-10-05)
The results of experimental and clinical studies for the comparative evaluation of implants used in herniology of polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF) are presented. Experimental investigations conducted on 200 mice, which in the anterior abdominal wall mesh prosthesis implanted.
X S Yi et al.
Water science and technology : a journal of the International Association on Water Pollution Research, 67(3), 477-484 (2012-12-04)
In the present study, nano-sized TiO(2)/Al(2)O(3) modified polyvinylidene fluoride (PVDF) membranes (MM) were fabricated and then utilized for oil/water emulsion separation. The results showed that, compared with PVDF membrane (OM), the contact angle of MM decreased and hydrophilicity increased. The
Adhikara Resosudarmo et al.
Water research, 47(2), 911-921 (2012-12-12)
Organic fouling remains a significant challenge in the application of ultrafiltration (UF) pretreatment systems in the desalination industry. In this study, the fouling potential of organic materials in seawater was investigated using model seawater solution containing humic acid and alginate.

資料

エレクトロスピニング技術による複雑な構造の作製について考察し、特に血管移植や組織工学の分野への応用について説明します。

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.

製品に関するお問い合わせはこちら(テクニカルサービス)