製品名
Duolink® In Situ PLA® プローブ抗ヤギMINUS, Affinity purified Donkey anti-Goat IgG (H+L)
biological source
donkey (polyclonal)
antibody form
affinity purified immunoglobulin (secondary antibody)
antibody product type
primary antibodies
product line
Duolink®
species reactivity
goat
technique(s)
immunofluorescence: suitable
proximity ligation assay: suitable
suitability
suitable for brightfield
suitable for fluorescence
shipped in
wet ice
storage temp.
2-8°C
Quality Level
関連するカテゴリー
Application
This product can be applied to both the Duolink® In Situ Fluorescence Protocol and the Duolink® In Situ Brightfield Protocol depending on the detection reagents used.
Visit our Duolink® PLA Resource Center for information on how to run a Duolink® experiment, applications, troubleshooting, and more.
To perform a complete Duolink® PLA in situ experiment you will need two primary antibodies (PLA, IHC, ICC or IF validated) that recognize two target epitopes. Other necessary reagents include a pair of PLA probes from different species (one PLUS and one MINUS), detection reagents, wash buffers, and mounting medium. Note that the primary antibodies must come from the same species as the Duolink® PLA probes. Analysis is carried out using standard immunofluorescence assay equipment.HRP is also available for brightfield detection.
Specificity
PLA probe anti-Goat reacts with whole molecule goat IgG and the light chains of other goat immunoglobulin′s. The PLA probe anti-Goat may cross-react with sheep antibodies, but has minimal cross reactivity with chicken, guinea pig, Syrian hamster, horse, human, mouse,rabbit, and rat serum proteins. A PLUS probe of a different species must be used simultaneously with this product. See our Product Selection Guide for more information.
Application Note
Two primary antibodies raised in different species are needed. Test your primary antibodies (IgG-class, mono- or polyclonal) in a standard immunofluorescence (IF), immunohistochemistry (IHC) or immunocytochemistry (ICC) assay to determine the optimal fixation, blocking, and titer conditions. Duolink®PLA in situ reagents are suitable for use on fixed cells, cytospin cells, cells grown on slide, formalin-fixed, paraffin embedded (FFPE), or tissue (fresh or frozen). No minimum number of cells is required.
Let us do the work for you, learn more about our Custom Service Program to accelerate your Duolink® projects
View full Duolink® product list
PLAプローブ抗ヤギは、ヤギIgG全分子および他のヤギ免疫グロブリンの軽鎖と反応します。PLAプローブ抗ヤギはヒツジ抗体と交差反応しますが、ニワトリ、モルモット、シリアンハムスター、ウマ、ヒト、マウス、ウサギ、ラットの血清タンパク質との交差反応性はわずかです。本製品と同時に、異なる種のPLUS(プラス)プローブを使用しなければなりません。詳細については、私たちのProduct Selection Guide(製品選択ガイド)をご覧ください。
アプリケーションノート
異なる種で産生された2種の一次抗体が必要です。ご使用になる一次抗体(IgGクラス、モノまたはポリクローナル)を標準免疫蛍光(IF)アッセイ、免疫組織染色(IHC)アッセイまたは免疫細胞染色(ICC)アッセイで検査し、最適な固定、ブロッキングおよび力価の条件を確認してください。Duolink® PLA in situ試薬は、固定細胞、サイトスピン細胞、スライド上で増殖した細胞、ホルマリン固定パラフィン包埋(FFPE)切片、または組織(新鮮または凍結)に適しています。細胞の最小数は不要です。
私たちはお客様と協力して作業します。私たちのカスタム・サービス・プログラムに対する理解が深まると、お客様のDuolink®プロジェクトが加速されます。
Duolink®全製品のリストをご覧ください。
Features and Benefits
- 過剰発現や遺伝子操作は不要です
- 高い特異性(偽陽性が少ない)
- ローリングサークル増幅による単一分子の感度
- 相対的な定量化が可能
- 特別な機器は必要ありません
- FRETより迅速かつ簡単
- co-IPと比較して精度が向上
- すぐに論文公表できる整った結果
Other Notes
- 5x PLAプローブ抗ヤギ MINUS-オリゴヌクレオチドMINUSに結合したロバ抗ヤギ二次抗体
- 1x ブロッキング溶液 - サンプルのブロッキング用試薬
- 1x 抗体希釈用試薬 - PLAプローブと一次抗体の希釈用
Legal Information
適切な製品が見つかりませんか。
製品選択ツール.をお試しください
保管分類
10 - Combustible liquids
資料
Things to consider for preparation, setup and execution of the Duolink® assay protocol
実験のTips & Tricks、FAQ、基本的なトラブルシューティングなどのサポート情報。
Duolink™アッセイプロトコルの準備・セットアップ・実施にあたり考慮すべき事項
プロトコル
Duolink® PLA reagents enable brightfield detection and quantification of proteins and interactions in tissue samples.
Duolink® PLA試薬により、組織試料に含まれるタンパク質および相互作用の明視野検出と定量化が可能になります。
関連コンテンツ
ライフサイエンス、有機合成、材料科学、クロマトグラフィー、分析など、あらゆる分野の研究に経験のあるメンバーがおります。.
製品に関するお問い合わせはこちら(テクニカルサービス)