Skip to Content
Merck
  • Advective hydrogel membrane chromatography for monoclonal antibody purification in bioprocessing.

Advective hydrogel membrane chromatography for monoclonal antibody purification in bioprocessing.

Biotechnology progress (2015-05-29)
Ying Hou, Mark Brower, David Pollard, Dharmesh Kanani, Renaud Jacquemart, Bradley Kachuik, James Stout
ABSTRACT

Protein A chromatography is widely employed for the capture and purification of monoclonal antibodies (mAbs). Because of the high cost of protein A resins, there is a significant economic driving force to seek new downstream processing strategies. Membrane chromatography has emerged as a promising alternative to conventional resin based column chromatography. However, to date, the application has been limited to mostly ion exchange flow through (FT) mode. Recently, significant advances in Natrix hydrogel membrane has resulted in increased dynamic binding capacities for proteins, which makes membrane chromatography much more attractive for bind/elute operations. The dominantly advective mass transport property of the hydrogel membrane has also enabled Natrix membrane to be run at faster volumetric flow rates with high dynamic binding capacities. In this work, the potential of using Natrix weak cation exchange membrane as a mAb capture step is assessed. A series of cycle studies was also performed in the pilot scale device (> 30 cycles) with good reproducibility in terms of yield and product purities, suggesting potential for improved manufacturing flexibility and productivity. In addition, anion exchange (AEX) hydrogel membranes were also evaluated with multiple mAb programs in FT mode. Significantly higher binding capacity for impurities (support mAb loads up to 10Kg/L) and 40X faster processing speed were observed compared with traditional AEX column chromatography. A proposed protein A free mAb purification process platform could meet the demand of a downstream purification process with high purity, yield, and throughput.

MATERIALS
Product Number
Brand
Product Description

Sodium chloride, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Trizma® hydrochloride, pH 3.5-5.0 (0.5 M in H2O), BioXtra, ≥99.0% (titration)
Sodium chloride, Molecular Biology, DNase, RNase, and protease, none detected, ≥99% (titration)
Sodium chloride, meets analytical specification of Ph. Eur., BP, USP, 99.0-100.5%
Sodium chloride solution, 0.9% in water, BioXtra, suitable for cell culture
Sodium chloride, BioXtra, ≥99.5% (AT)
Sodium chloride, tablet
Sodium chloride solution, 5 M
MOPS, BioPerformance Certified, suitable for cell culture, ≥99.5% (titration)
Sodium chloride solution, 5 M in H2O, BioReagent, Molecular Biology, suitable for cell culture
MOPS, ≥99.5% (titration)
Sodium chloride solution, BioUltra, Molecular Biology, ~5 M in H2O
Sigma-Aldrich
Trizma® hydrochloride, BioUltra, Molecular Biology, ≥99.0% (AT)
MOPS, BioXtra, ≥99.5% (titration)
Sodium chloride, BioUltra, Molecular Biology, ≥99.5% (AT)
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Acetic acid, suitable for luminescence, BioUltra, ≥99.5% (GC)
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Acetic acid-12C2, 99.9 atom % 12C
Sigma-Aldrich
Sodium phosphate monobasic-16O4, 99.9 atom % 16O
Sodium chloride solution, 0.85%
Sigma-Aldrich
Sodium phosphate dibasic solution, BioUltra, 0.5 M in H2O
Sodium chloride, AnhydroBeads, −10 mesh, 99.999% trace metals basis
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Acetic acid, ≥99.5%, FCC, FG
Sodium chloride, random crystals, 99.9% trace metals basis
Sodium chloride, 99.999% trace metals basis
Sodium chloride-35Cl, 99 atom % 35Cl
Sodium chloride solution, 5 M
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis