다음 MAP메이트™는 통합될 수 없습니다: -다른 분석 완충용액이 필요한 MAP메이트™. -인산 특이성 및 총 MAP메이트™ 조합, 예: 총 GSK3β 및 GSK3β(Ser 9). -PanTyr 및 자리 특이성 MAP메이트™, 예: Phospho-EGF 수용체 및 phospho-STAT1(Tyr701). -단일 표적(Akt, STAT3)를 위한 1개 이상의 1 phospho-MAP메이트™. - GAPDH 및 β-Tubulin은 panTyr를 포함하는 키트 또는 MAP메이트™와 통합될 수 없습니다.
Custom Premix Selecting "Custom Premix" option means that all of the beads you have chosen will be premixed in manufacturing before the kit is sent to you.
Catalogue Number
Ordering Description
Qty/Pack
List
이 제품은 즐겨찾기에 저장되었습니다.
종
패널 유형
선택하신 키트
수량
카탈로그 번호
주문 설명
포장 단위
기재 가격
96-Well Plate
수량
카탈로그 번호
주문 설명
포장 단위
기재 가격
다른 시약 추가 (MAP메이트 사용을 위해 완충용액과 검출 키트가 필요함)
수량
카탈로그 번호
주문 설명
포장 단위
기재 가격
48-602MAG
Buffer Detection Kit for Magnetic Beads
1 Kit
공간 절약 옵션 다수의 키트를 구매하시는 고객은 고용량 저장을 위해 키트 포장을 제거하고 비닐백에 담긴 멀티플레스 분석 구성품을 받아 저장 공간을 절약하도록 선택할 수 있습니다.
이 제품은 즐겨찾기에 저장되었습니다.
해당 제품은 고객님의 카트에 추가되었습니다.
이제 다른 키트를 사용자 지정하거나, 사전 혼합된 키트를 선택하거나, 결재하거나 또는 주문 도구를 종료할 수 있습니다.
Water is used in COD tests for blank preparation, sample dilutions and glassware rinsing. The following water contaminants may have effects on the COD test:
Organics Since the COD test measures the oxygen demand of organic compounds in a sample of water, it is important that no outside organic material be accidentally added to the sample to be measured, as it may give falsely high results.
Bacteria It is best to minimize their levels in the dilution water, as they may release organics.
Ions Oxidizable inorganic materials may interfere with the determination of COD. They may be oxidized by dichromate and give erroneously high COD results: chlorides are often the most serious source of interference. Nitrites, sulfides and disulfides, sulfites, thiosulfates and ferrous ions may also interfere with the COD test.
Distilled water has been used to prepare dilution water; however, chlorine may co-distil with water and interfere with the COD test. Therefore, distilled water would require an additional sodium thiosulfate treatment. Distillation from alkaline permanganate was sometimes recommended, but this purification procedure is quite cumbersome as well.
Deionized water, purified only by ion exchange resins, may contain organics and microorganisms, thereby causing high COD results. Since the level of organic contamination of deionized water may vary with time, it is not recommended for this test.
Water purified with a combination of technologies, such as reverse-osmosis, ion exchange and/or electrodeionization and activated carbon is low in organics and oxidizable inorganic substances. It is therefore best fitted for the COD test.
Feel free to express your comments
Your opinion is important for us. Please let us know if the information provided was useful, if there is missing information that you would like to see or if you have experience that you would like to share with us on this topic. Please contact us by e-mail, send us feed back and we will come back to you. Contact us.